Filiz Steel, a reputable manufacturer and supplier based in Istanbul, Turkey, proudly presents its top-notch Carbon Steel EN-44 Bars, celebrated for their outstanding strength, durability, and reliability. Crafted to meet international standards, these bars are meticulously engineered to guarantee consistent mechanical performance and precise dimensions. Thanks to Filiz Steel’s cutting-edge production techniques and rigorous quality control, these products are built to endure the toughest industrial and structural challenges. Commonly found in the automotive, construction, machinery, and engineering sectors, Carbon Steel EN-44 Bars deliver robust, long-lasting solutions. Their remarkable toughness and versatility make them perfect for applications that demand high strength, wear resistance, and structural integrity.
These Carbon Steel EN-44 Bars are made from a balanced mix of carbon, manganese, silicon, phosphorus, and sulfur, providing an ideal blend of hardness, strength, and ductility. They showcase impressive tensile and yield strength, good elongation, and excellent toughness, making them perfect for heavy-duty and structural uses. Their mechanical properties include outstanding wear resistance, impact strength, machinability, and weldability. Carbon Steel EN-44 Bars maintain their shape and structural integrity even under varying loads and stresses, ensuring long-term reliability and performance across a range of industrial, mechanical, and construction applications.
| Grade | EN44 |
|---|---|
| Specification | BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Element | En42J |
| C | 0.75 – 0.90% |
| Mn | 0.50 – 0.90% |
| Si | 0/1 – 0.35 |
| S | 0.04% Max |
| P | 0.04% Max |
|
ULTIMATE TENSILE STRENGTH, S. (MPA) |
621 |
|---|---|
|
Modulus of elasticity, E (Gpa) |
204 |
|
Fatigue strength coefficient, of (Mpa) |
948 |
|
Fatigue strength exponent, b |
-0.092 |
|
Fatigue ductility coeffient ,ef |
0.26 |
|
Fatigue ductility exponent,c |
-0.445 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
In industries that prioritize durability, precision, and high strength, Carbon Steel EN-44 Bars are widely utilized. In the automotive field, they’re used for shafts, gears, and other high-strength components. The construction and engineering sectors rely on them for structural frameworks, reinforcements, and machinery parts. They also find applications in heavy engineering, fabrication projects, and industrial equipment where toughness and wear resistance are essential. With their excellent mechanical properties and versatility, Carbon Steel EN-44 Bars truly offer reliable solutions for demanding environments.
Filiz Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Istanbul, Turkey.
Copyright 2025 Filiz Steel. All rights reserved
